Volumetric feeder in the process of using precautions

Volumetric feeder in the use of the process will inevitably be such a small problem, but if you know ahead of some coping strategies, you can avoid problems, if there is a problem you can calmly face the following for everyone to introduce the next note:

First, the volumetric feeder at the time of the move, it is not to put the above things, so easy to cause the motor to withstand excessive pressure and burn the motor.

Second, check the belt is intact, is there any loose. Feeding machine is to rely on the belt to transfer material, only the belt can be fully normal machine performance, work capacity to achieve maximum.

Third, because all parts of the volumetric feeder are gear and chain control connection, so gear and chain must ensure the greatest degree of lubrication, so as not to damage the machine because of lack of lubrication.

Fourth, due to the production of feed will produce a lot of dust, will make the feeder control box accumulated a lot of dust, dust will make the internal circuit short circuit, damage to electrical circuits and other components, so clean up from time to time Look at the dust in the control box.

Fifth, the main power of the volumetric feeder is the motor, the motor has a power motor and a geared motor (due to the motor speed is high, so when using the geared motor to slow down). When using a little to check whether the power motor and gear motor is abnormal. Motor should be timely maintenance, such as: Gear reducer gear with gear oil.