How does the automatic volumetric feeder work

The electrical control system of the system is mainly composed of AC contactor, sensor, switch, indicator lamp and so on.

Working principle: under the drive of the motor, the spiral spring spring in the conveying pipeline does not rotate, and drives feed to the plates. The system will judge whether the front end material box has material, if there is material, control the motor rotation, if the material box is empty, control the motor rotation; at the same time, the testing material disks installed at the end of the material line are also checked whether the material has been filled, if the control motor is full, the motor will stop turning, if the motor is not full, the motor will continue to rotate. The whole feeding process is controlled automatically. After using the automatic feeding system, the farmer only needs to pour the material into the front box, and then the feeding is completed automatically by the system. The feeding process is quite easy.

Automatic volumetric feeder features:

1. the feeding is uniform and the operation is convenient.

2. feed size, can be adjusted.

3. equipped with feed stereoscopic lifting and horizontal feeding system.

4. can fully realize the mechanization of feed.

5. the floor area is small, and the four row feeder only has two tracks.

6, the layout of the small farm facilities is not standardized and designed. It has unique structure, novel and practical, time saving and labor saving, less loss, small noise, convenient operation, convenient maintenance, and three to four layers.